Home> Products > Animal Disease Testing Kits > Bovine Disease Detection Kit

Bovine And Sheep Hydatid Ab Rapid Test Kit

This reagent was prepared based on the principle of colloidal gold immunochromatography (GICA). After adding the sample to the sample well, the sample moves along the chromatographic membrane with the colloidal gold marker. The antigen binds online and displays a magenta color. If the virus antibody is not present in the sample, no color reaction will occur.


Bovine And Sheep Hydatid Ab Rapid Test Kit (colloidal gold method)

[Packing Specifications] 40T / box

[Kit composition]


No.

Name

40T / box

1.

test   cards (including straws)

40

2.

Sample   dilution

40bottles

3.

straws

40 sticks

4.

instruction   manual

1

[Storage and expiry date] Store in a cool and dry place (2-30 ° C), valid for 24 months.



[Sample requirements]

1. This test card is only suitable for testing bovine and sheep serum / whole blood / milk samples.

2. Serum: Take 2-3ml of blood according to the conventional method and place it in a clean and dry test tube. Let it stand for about 1 hour. After the blood is coagulated, centrifuge at 4000 rpm for 10 minutes. Serum is naturally precipitated), and the serum is separated. Require serum to be clear, no hemolysis, no pollution. Serum samples can be stored at 2-8 ° C in the short-term and at -20 ° C in the long-term.

3. Whole blood: Fresh anticoagulated whole blood is collected and used on the day. Whole blood without anticoagulant is collected and used.

4. Milk samples: Use fresh milk samples the same day.

experiment method

1. Use the matched pipette to suck the prepared sample, and slowly and slowly add 1 drop of serum or 2 drops of whole blood or 2 drops of milk to the sample dilution solution (note: this step is very important, the sample must not be added). Mix well and set aside.

2. Tear off the aluminum foil packaging bag of the test card, remove the test card, place it on a flat, clean surface, and use a pipette to take 2-3 drops (about 60ul) of the test solution obtained in step 1 into the sample well.

3. Leave at room temperature for 10-15 minutes to judge the results. The results after 15 minutes are for reference only.